Raspberry Pi Global Shutter Camera - 1.6MP Sony IMX296 for Fast Motion
Capture fast-moving objects without motion blur with the Official Raspberry Pi Global Shutter Camera. Featuring the Sony IMX296 global shutter sensor with 1.58 megapixels, this specialized camera eliminates rolling shutter artifacts that plague traditional cameras when capturing rapid motion. Perfect for machine vision, industrial automation, high-speed photography, and robotics applications where distortion-free images are critical.
No More Jello Effect - True Global Shutter
Unlike rolling shutter cameras that capture images line-by-line creating distortion with fast motion, the global shutter sensor captures the entire frame simultaneously. This eliminates the "jello effect," skew, and wobble artifacts - essential for machine vision AI inference, barcode scanning, and high-speed photography.
Key Features
Global Shutter Technology
- Sony IMX296 Sensor - Professional 1.58MP global shutter CMOS
- Simultaneous Capture - Entire frame captured at once, no rolling shutter
- No Motion Artifacts - Eliminates jello effect, skew, and distortion
- Fast Motion Capable - Perfect for high-speed objects
Exceptional Light Sensitivity
- Large 3.45μm Pixels - Outstanding low-light performance
- Ultra-Short Exposure - As low as 30μs with adequate lighting
- High-Speed Photography - Freeze fast-moving subjects
- Low-Noise Performance - Clean images even in challenging light
Professional Lens System
- C/CS-Mount Compatible - Industry-standard lens mount
- C-CS Adapter Included - Works with both C and CS mount lenses
- Adjustable Back Focus - 12.5-22.4mm range
- Wide Lens Compatibility - Same as Raspberry Pi HQ Camera
Machine Vision Ready
- Optimized Resolution - 1.58MP ideal for real-time AI processing
- RAW10 Output - Uncompressed data for vision algorithms
- Low Latency - Fast frame acquisition
- Integrated IR Cut Filter - Removable for IR applications
Technical Specifications
| Image Sensor |
| Sensor Model |
Sony IMX296LQR-C (Color) |
| Shutter Type |
Global Shutter (simultaneous capture) |
| Resolution |
1.58 megapixels (1456 x 1088 pixels) |
| Sensor Size |
6.3mm diagonal (1/2.9-inch format) |
| Pixel Size |
3.45μm x 3.45μm (large pixels for high sensitivity) |
| Sensor Type |
CMOS active pixel, square pixel array |
| Performance |
| Output Format |
RAW10 (10-bit raw data) |
| Frame Rate |
Up to 60 FPS (depending on interface and settings) |
| Exposure Time |
As low as 30μs (microseconds) with adequate lighting |
| Light Sensitivity |
Excellent (3.45μm large pixels) |
| Lens System |
| Lens Mount |
CS-Mount (C-Mount with included adapter) |
| Back Focus Length |
Adjustable: 12.5mm - 22.4mm |
| Included Adapter |
C-to-CS mount adapter |
| IR Cut Filter |
Integrated (removable, but modification is permanent) |
| Physical & Connectivity |
| Form Factor |
38 x 38 x 19.8mm (29.5mm with adapter and dust cap) |
| Weight |
34g (41g with adapter and dust cap) |
| Ribbon Cable |
150mm CSI ribbon cable included |
| Tripod Mount |
1/4 inch-20 thread (standard tripod mount) |
| Back Cover |
Removable plastic dust cover included |
| Compatibility |
| Compatible Boards |
All Raspberry Pi models with CSI camera connector |
| Supported Models |
Raspberry Pi 5, 4B, 3B+, 3A+, 3B, Zero 2 W, Zero W (with adapter cable) |
| Software Support |
libcamera, Picamera2, rpicam-apps (native support) |
| Standards & Compliance |
| Certifications |
FCC, EMC, RoHS compliant |
| IP Rating |
IP40 |
| Production Guarantee |
Available until at least January 2032 |
Global Shutter vs Rolling Shutter
| Feature |
Global Shutter (This Camera) |
Rolling Shutter (Standard Cameras) |
| Image Capture Method |
Entire frame simultaneously |
Line-by-line scanning |
| Fast Motion Artifacts |
None - no jello effect |
Skew, wobble, jello effect |
| High-Speed Objects |
Sharp, undistorted |
Distorted, blurred |
| Machine Vision |
Excellent for AI inference |
Artifacts degrade accuracy |
| Barcode/QR Scanning |
Reliable on moving objects |
Poor on moving conveyors |
| Resolution |
1.58MP (optimized for real-time) |
Higher resolution available |
| Best For |
Industrial, machine vision, robotics |
General photography, video |
When to Choose Global Shutter
- Capturing fast-moving objects (conveyor belts, drones, sports)
- Machine vision and AI inference applications
- Industrial automation and quality control
- Barcode/QR code scanning on moving items
- Robotics with moving cameras or subjects
- High-speed photography requiring freeze-frame accuracy
Perfect For Professional Applications
Machine Vision
Object detection, classification, defect inspection - no motion artifacts
Industrial Automation
Quality control, sorting, assembly line inspection, robotic guidance
Barcode Scanning
Reliable scanning on moving conveyors, logistics, warehouse automation
Robotics
Vision-guided navigation, object tracking, autonomous vehicles
High-Speed Photography
Sports, wildlife, scientific research, ballistics testing
Scientific Imaging
Motion analysis, particle tracking, fluid dynamics, research
What's Included
| Global Shutter Camera |
1x Raspberry Pi Global Shutter Camera with Sony IMX296 sensor |
| Ribbon Cable |
1x 150mm CSI camera cable |
| Lens Adapter |
1x C-to-CS mount adapter |
| Tools |
1x Screwdriver for back focus adjustment |
| Protection |
1x Removable plastic back cover (dust cap) |
| Documentation |
Quick start guide, datasheet links |
What You Need (Sold Separately)
Required - NOT Included
- Raspberry Pi Board - Any model with CSI connector (Pi 5, 4B, 3B+, Zero 2 W, etc.)
- C or CS Mount Lens - Camera does NOT include lens
- Power Supply - Appropriate for your Raspberry Pi model
- MicroSD Card - With Raspberry Pi OS installed
- Raspberry Pi Zero Camera Cable - If using with Pi Zero (standard cable incompatible)
Important Information
LENS NOT INCLUDED
This camera does NOT include a lens.
You must purchase a separate C-mount or CS-mount lens. The camera uses the same lens mount as the Raspberry Pi HQ Camera. Lens choice depends on your application - wide angle for general vision, telephoto for distant objects, or macro for close-up work.
Raspberry Pi Zero Compatibility
Raspberry Pi Zero, Zero W, and Zero 2 W require a special camera cable with smaller connector on the Pi end. The standard 150mm cable included with this camera will NOT fit Raspberry Pi Zero models. Purchase a Raspberry Pi Zero camera cable separately.
IR Cut Filter Removal
The camera includes an integrated IR cut filter. This can be permanently removed if you need IR sensitivity (for night vision or infrared applications). Warning: Removal is irreversible - once removed, you cannot re-install the filter.
Native Raspberry Pi Support
Works with latest Raspberry Pi OS out of the box using libcamera and Picamera2. No special drivers needed. The camera is fully supported by rpicam-apps for still and video capture.
Resolution Optimized for Machine Vision
The 1.58MP resolution may seem low compared to consumer cameras, but it's intentionally optimized for machine vision:
- Real-Time Processing - Lower resolution means faster AI inference
- Reduced Bandwidth - Easier to transmit and process in embedded systems
- Native Scale - With proper lens, capture at native model input size
- Focused Performance - Sensor resources dedicated to speed, not megapixels
- Industrial Standard - Typical resolution for machine vision applications
Recommended Lenses
For Different Applications:
- Wide Angle (4-6mm) - General machine vision, room monitoring, large field of view
- Standard (8-12mm) - General purpose, moderate field of view, versatile
- Telephoto (16-25mm) - Distant objects, narrow field of view, magnification
- Macro - Close-up inspection, small parts, microscopy applications
Note: Lenses sold separately. Check our related products for compatible C/CS mount lenses.
Software Examples
Using libcamera (Raspberry Pi OS):
# Take a still image
libcamera-still -o test.jpg
# Record video
libcamera-vid -t 10000 -o test.h264
# Preview with short exposure (high-speed)
libcamera-hello --shutter 30
Using Picamera2 (Python):
from picamera2 import Picamera2
picam2 = Picamera2()
config = picam2.create_still_configuration()
picam2.configure(config)
picam2.start()
# Capture image
picam2.capture_file("test.jpg")
Frequently Asked Questions
Q: Does this camera include a lens?
A: No. You must purchase a separate C-mount or CS-mount lens. The camera works with the same lenses as the Raspberry Pi HQ Camera.
Q: What's the difference between global and rolling shutter?
A: Global shutter captures the entire frame simultaneously, eliminating motion blur and distortion. Rolling shutter captures line-by-line, causing "jello effect" with fast motion.
Q: Why is the resolution only 1.58MP?
A: This is intentional for machine vision. Lower resolution allows real-time processing, faster frame rates, and is standard for industrial applications where speed matters more than megapixels.
Q: Will this work with Raspberry Pi Zero?
A: Yes, but you need a special Raspberry Pi Zero camera cable (sold separately). The standard cable included won't fit the smaller Zero connector.
Q: Can I remove the IR cut filter?
A: Yes, but removal is permanent and irreversible. Only remove if you specifically need IR sensitivity.
Q: What frame rate can this camera achieve?
A: Up to 60 FPS depending on your Raspberry Pi model, resolution settings, and image processing pipeline.
Q: Does it work with libcamera?
A: Yes! Fully supported by libcamera, Picamera2, and rpicam-apps on Raspberry Pi OS. No special drivers needed.
Q: What's the shortest exposure time?
A: As low as 30 microseconds with adequate lighting - perfect for freezing very fast motion.
Why Buy from CrazyPi.com?
- Genuine Raspberry Pi Product - Official camera with warranty
- Expert Support - Technical assistance for machine vision projects
- Fast Shipping - Quick delivery across India
- Complete Ecosystem - Compatible lenses, mounts, accessories available
- Bundle Deals - Save on camera + lens + Pi combinations
- Production Guaranteed - Supported until 2032
Complete Machine Vision Kits Available!
Save time with our ready-to-use kits including Global Shutter Camera, lens, Raspberry Pi, and accessories - all at discounted bundle prices!
Technical Resources
- Product Brief - Official Raspberry Pi datasheet (PDF)
- Mechanical Drawing - CAD dimensions for enclosures
- Camera Documentation - Complete setup and usage guide
- libcamera Examples - Code samples and tutorials
- Picamera2 Library - Python API documentation
True Global Shutter - No Motion Artifacts - Professional Machine Vision
Buy Official Raspberry Pi Global Shutter Camera at CrazyPi.com - India's source for professional Pi cameras.
